[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
TRUMPF
TruLaser Tube 7000 8kW URL
8kW Fiber tube
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
8kW Fiber tube cutting Machine
8kW
10mm
Germany
2024
±0.04mm
Interested in the TRUMPF TruLaser Tube 7000 8kW URL?
Get pricing and availability from verified suppliers
TRUMPF TruLaser Tube 7000 8kW buyer page for premium tube-laser searches. Validate Tube 7000 naming, 8kW fiber source package, tube and profile envelope, 3D cutting head, loading and unloading workflow, TruTops Tube programming, seam detection, sample tube cuts, service response, operator training, warranty labor, and installed cost before comparing with Tube 5000 Fiber, Mazak FT, LVD TL, BLM LT7, or ByTube systems.
Use this Tube 7000 8kW page for premium tube laser searches where higher-power tube processing, tube envelope, 3D cutting, loading workflow, automation, software, and service support must be validated.
Confirm Tube 7000 naming, tube diameter and profile range, 8kW source, 3D cutting head, LoadMaster scope, unloading, seam detection, TruTops Tube software, chiller, extraction, and safety package.
Request tube and profile samples with bevel quality, hole accuracy, weld-prep geometry, fixture assumptions, cycle time, unloading constraints, and scrap rate documented.
Benchmark TRUMPF against Mazak FT, BLM, LVD, and Adige systems only after matching automation, software workflow, service response, spare parts, and installed cost.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $780000-1200000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
Tube 7000 8kW route for premium tube workflow validation
Tube 7000 8kW comparisons should separate tube workflow from flat-bed fiber cutters, then normalize profile range, loading, programming, sample tubes, service response, spare parts, training, warranty labor, and installed cost.
Best For: Tube fabricators validating high-end automation where profile envelope, programming, samples, service, and installed cost must be proven.
Power vs. work area compared to 50 machines in this category
| Brand | TRUMPF |
| Model | TruLaser Tube 7000 8kW URL |
| Laser Type | Fiber tube |
| Power Output | 8 kW |
| Wavelength | 1070 nm |
| Laser Source | TRUMPF |
| Positioning Accuracy | ±0.04 mm |
| Repeatability | ±0.02 mm |
| Control System | TRUMPF TruTops Tube |
| Cooling Type | Water |
| Country of Origin | DE |
| Release Year | 2024 |
| Warranty | 2 years |
| Price Range | $780,000 - $1,200,000 |
Maximum cutting thickness across materials
Maximum material thickness and cutting speeds for the TRUMPF TruLaser Tube 7000 8kW URL
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Mild Steel | 10mm | - | - |
| Stainless Steel | 8mm | - | - |
| Aluminum | 6mm | - | - |
| Titanium | mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Tube fabricators validating high-end automation where profile envelope, programming, samples, service, and installed cost must be proven.
Request the preventive maintenance schedule, spare parts kit, and local service response time before purchase approval.
These high-power alternatives offer comparable specifications from other manufacturers.
| Model | Power | Work Area | Max Steel | Origin | |
|---|---|---|---|---|---|
TRUMPF TruLaser Tube 7000 8kW URL Current | 8 kW | - | 10mm | Germany | - |
Senfeng SF12025H 60kW | 60 kW | 12000×2500 | 100mm | China | View → |
Cutlite Penta Plus EVO 12030 60kW | 60 kW | 12000×3000 | 80mm | Italy | View → |
HSG G6025H 40kW | 40 kW | 6000×2500 | 80mm | China | View → |
Cutlite Penta FHD 12030 40kW | 40 kW | 12000×3000 | 70mm | Italy | View → |
7 models available — sorted by power output
Steel: 10mm max
Common questions about the TRUMPF TruLaser Tube 7000 8kW URL
The TRUMPF TruLaser Tube 7000 8kW URL features a 8kW fiber tube laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the TRUMPF TruLaser Tube 7000 8kW URL 8kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Pick fiber, CO2, or solid-state based on material, wavelength, and budget.
02Laser Power RecommenderTranslate material and thickness needs into a viable power range.
03Workspace Size MatcherMatch part dimensions and nesting needs to table size.
04Assist Gas SelectorChoose gas type, pressure, and purity before comparing systems.
05Chiller Capacity CalculatorSize support equipment once the laser class is known.