[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
TRUMPF
TruLaser Center 7030 10kW
10kW Fiber
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
10kW Fiber cutting Machine
10kW
3000×1500mm
30mm
Germany
2024
±0.02mm
Interested in the TRUMPF TruLaser Center 7030 10kW?
Get pricing and availability from verified suppliers
TRUMPF TruLaser Center 7030 10kW buyer page for exact automated sheet-processing searches. Validate Center 7030 naming, 3015 sheet format, 10kW source package, automated loading, cutting, part removal, skeleton handling, nozzle workflow, TruTops Boost software, chiller, extraction, gas infrastructure, sample proof, service response, training, warranty labor, and installed cost before comparing with TruLaser 5030, Bystronic automation, Salvagnini L5, Amada REGIUS, or standalone 2D lasers.
Use this TruLaser Center 7030 page for automated sheet-processing searches where part removal, skeleton handling, software workflow, gas infrastructure, samples, service, and installed automation scope must be validated before comparing with standalone 2D lasers.
Confirm Center 7030 naming, 3015 sheet format, 10kW source package, cutting head, automated loading, part removal, skeleton handling, nozzle workflow, TruTops Boost software, chiller, extraction, and gas infrastructure.
Request representative nests with cut quality, part removal success, scratch risk, skeleton handling, remnant workflow, operator interventions, nitrogen use, and cycle time documented.
Compare against TruLaser 5030, Bystronic automation, Salvagnini L5, Amada REGIUS, and standalone systems only after matching automation scope, service response, training, warranty labor, and installed cost.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $900000-1600000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
TruLaser Center 7030 route for automated cutting and part-removal validation
TruLaser Center 7030 comparisons should distinguish this route from standalone TruLaser pages, then normalize automation scope, part removal, software, gas plan, samples, service, training, warranty labor, and installed cost.
Best For: Fabricators validating lights-out sheet processing where automation flow, part removal, software, service response, and installed cost determine ROI.
Power vs. work area compared to 51 machines in this category
| Brand | TRUMPF |
| Model | TruLaser Center 7030 10kW |
| Laser Type | Fiber |
| Power Output | 10 kW |
| Wavelength | 1070 nm |
| Laser Source | TRUMPF |
| Work Area (L × W) | 3000 × 1500 mm |
| Positioning Accuracy | ±0.02 mm |
| Repeatability | ±0.01 mm |
| Control System | TRUMPF TruTops Boost |
| Cooling Type | Water |
| Country of Origin | DE |
| Release Year | 2024 |
| Warranty | 2 years |
| Price Range | $900,000 - $1,600,000 |
Maximum cutting thickness across materials
Maximum material thickness and cutting speeds for the TRUMPF TruLaser Center 7030 10kW
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Mild Steel | 30mm | 20m/min | 8.2m/min |
| Stainless Steel | 24mm | - | 6.3m/min |
| Aluminum | 20mm | - | 8.8m/min |
| Titanium | mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Fabricators validating lights-out sheet processing where automation flow, part removal, software, service response, and installed cost determine ROI.
Budget for protective window replacement, nozzle wear, chiller service, extraction filters, and periodic source/cutting-head inspection.
These high-power alternatives offer comparable specifications from other manufacturers.
| Model | Power | Work Area | Max Steel | Origin | |
|---|---|---|---|---|---|
TRUMPF TruLaser Center 7030 10kW Current | 10 kW | 3000×1500 | 30mm | Germany | - |
Senfeng SF12025H 60kW | 60 kW | 12000×2500 | 100mm | China | View → |
Cutlite Penta Plus EVO 12030 60kW | 60 kW | 12000×3000 | 80mm | Italy | View → |
HSG G6025H 40kW | 40 kW | 6000×2500 | 80mm | China | View → |
Cutlite Penta FHD 12030 40kW | 40 kW | 12000×3000 | 70mm | Italy | View → |
7 models available — sorted by power output
3000×1500mm
Steel: 30mm max
Common questions about the TRUMPF TruLaser Center 7030 10kW
The TRUMPF TruLaser Center 7030 10kW features a 10kW fiber laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the TRUMPF TruLaser Center 7030 10kW 10kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Pick fiber, CO2, or solid-state based on material, wavelength, and budget.
02Laser Power RecommenderTranslate material and thickness needs into a viable power range.
03Workspace Size MatcherMatch part dimensions and nesting needs to table size.
04Assist Gas SelectorChoose gas type, pressure, and purity before comparing systems.
05Chiller Capacity CalculatorSize support equipment once the laser class is known.