[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
EWAG
Laser Line Ultra URL
Power not listed Fiber
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
Power not listed Fiber machining Machine
Power not listed
Switzerland
2024
±0.001mm
Interested in the EWAG Laser Line Ultra URL?
Get pricing and availability from verified suppliers
EWAG Laser Line Ultra buyer page for tool-machining searches. Validate Laser Line Ultra naming, 5-axis laser machining scope, PCD/CBN/carbide tool geometry, automation, probing, software, dust extraction, sample tools, inspection workflow, service response, operator training, warranty labor, and installed cell cost before comparing with Rollomatic LaserSmart 510, DMG MORI, GF Machining, or grinding alternatives.
Use this Laser Line Ultra page for tool-machining searches where buyers must validate PCD, CBN, or carbide tool geometry, 5-axis laser scope, automation, probing, software, extraction, sample tools, inspection workflow, service response, and installed cell cost.
Confirm Laser Line Ultra naming, tool material, flute or edge geometry, 5-axis motion, automation, probing, software workflow, extraction, coolant or dust handling, and whether the target work is better served by laser machining than grinding.
Request representative PCD, CBN, or carbide tool samples with edge quality, geometry tolerance, surface finish, cycle time, and inspection method documented.
Normalize automation, fixtures, probing, software, extraction, metrology, operator training, service response, warranty labor, and application support before comparing against grinding or other laser tool-machining cells.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $850000-1200000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
Laser Line Ultra route for tool-machining validation
Laser Line Ultra comparisons should stay tool-machining focused; normalize automation, probing, software, extraction, sample tools, inspection, operator training, service response, and installed cell cost.
Best For: Tool manufacturers validating laser machining for PCD, CBN, and carbide tools where samples, inspection, automation, service, and installed cell cost must be proven.
Power vs. work area compared to 6 machines in this category
| Brand | EWAG |
| Model | Laser Line Ultra URL |
| Laser Type | Fiber |
| Power Output | 0 kW |
| Wavelength | 1064 nm |
| Laser Source | EWAG configured fiber |
| Positioning Accuracy | ±0.001 mm |
| Repeatability | ±0.0005 mm |
| Control System | ProGrind |
| Cooling Type | Water |
| Country of Origin | CH |
| Release Year | 2024 |
| Warranty | 1 years |
| Price Range | $850,000 - $1,200,000 |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Tool manufacturers validating laser machining for PCD, CBN, and carbide tools where samples, inspection, automation, service, and installed cell cost must be proven.
Material capability is not fully published. Request a test-cut report for your thickest production material.
Check thickness parametersBudget for protective window replacement, nozzle wear, chiller service, extraction filters, and periodic source/cutting-head inspection.
These entry-level alternatives offer comparable specifications from other manufacturers.
2 models available — sorted by power output
Common questions about the EWAG Laser Line Ultra URL
The EWAG Laser Line Ultra URL features a 0kW fiber laser, suitable for precision machining of cutting tools.
Contact suppliers for pricing, lead times, and detailed specifications for the EWAG Laser Line Ultra URL 0kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.