[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
Eurolaser
L-3200 500W CO2
500W CO2
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
500W CO2 cutting Machine
500W
3200×2200mm
Germany
2024
±0.1mm
Interested in the Eurolaser L-3200 500W CO2?
Get pricing and availability from verified suppliers
Eurolaser L-3200 500W CO2 buyer page for large-format non-metal cutting searches. Validate 3200mm bed format, CO2 source package, conveyor or table configuration, camera or registration options, extraction, fire safety, material samples, software workflow, service support, and installed cost before comparing with Trotec SP3000, Kern OptiFlex, or fiber metal cutters.
Use this L-3200 page for large-format CO2 searches where material fit, bed format, extraction, fire safety, table configuration, samples, software workflow, and service support must be validated. The searched URL may sit under fiber cutting, but this is a CO2 non-metal workflow.
Confirm acrylic, textile, plastics, wood, foam, packaging, or signage workload; do not compare this CO2 system with metal fiber cutters by wattage alone.
Validate 3200mm bed format, conveyor or table setup, optics, registration camera options, exhaust or filtration, fire controls, air assist, cooling, and software package.
Request cut and engraving samples with edge quality, smoke residue, char, taper, kerf, cycle time, fixture assumptions, and maintenance requirements documented.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $180000-320000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
500W L-3200 CO2 route for large-format non-metal workflow validation
The URL category may show fiber-laser-cutting because that is the searched route, but the content should clarify this is a CO2 non-metal workflow. Compare bed, table, extraction, fire controls, samples, software, service, and installed cost.
Best For: Fabricators and converters validating large-format CO2 cutting where material fit, extraction, fire safety, and service matter more than metal-cutting wattage.
Power vs. work area compared to 50 machines in this category
| Brand | Eurolaser |
| Model | L-3200 500W CO2 |
| Laser Type | CO2 |
| Power Output | 0.5 kW |
| Wavelength | 10600 nm |
| Laser Source | Eurolaser |
| Work Area (L × W) | 3200 × 2200 mm |
| Positioning Accuracy | ±0.1 mm |
| Repeatability | ±0.05 mm |
| Control System | Eurolaser control |
| Cooling Type | Water |
| Country of Origin | DE |
| Release Year | 2024 |
| Warranty | 2 years |
| Price Range | $180,000 - $320,000 |
Maximum material thickness and cutting speeds for the Eurolaser L-3200 500W CO2
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Titanium | mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Fabricators and converters validating large-format CO2 cutting where material fit, extraction, fire safety, and service matter more than metal-cutting wattage.
Material capability is not fully published. Request a test-cut report for your thickest production material.
Check thickness parametersBudget for mirror alignment, tube or resonator service, optics cleaning, chiller maintenance, and regular beam-path inspection.
These entry-level alternatives offer comparable specifications from other manufacturers.
| Model | Power | Work Area | Max Steel | Origin | |
|---|---|---|---|---|---|
Eurolaser L-3200 500W CO2 Current | 0.5 kW | 3200×2200 | - | Germany | - |
TRUMPF TruLaser 1030 fiber | 3 kW | 3000×1500 | 12mm | Germany | View → |
Kern Lasers FiberCELL | 3 kW | 1320×1020 | 12mm | United States | View → |
DNE Laser D-Fast 1530 3kW | 3 kW | 3000×1500 | 16mm | China | View → |
Han's Laser G3015F 3kW | 3 kW | 3000×1500 | 16mm | China | View → |
2 models available — sorted by power output
3200×2200mm
Common questions about the Eurolaser L-3200 500W CO2
The Eurolaser L-3200 500W CO2 features a 0.5kW co2 laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the Eurolaser L-3200 500W CO2 0.5kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Pick fiber, CO2, or solid-state based on material, wavelength, and budget.
02Laser Power RecommenderTranslate material and thickness needs into a viable power range.
03Workspace Size MatcherMatch part dimensions and nesting needs to table size.
04Assist Gas SelectorChoose gas type, pressure, and purity before comparing systems.
05Chiller Capacity CalculatorSize support equipment once the laser class is known.