[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
Mazak
OPTIPLEX Bevel 3015
8kW Fiber
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
8kW Fiber cutting Machine
8kW
3050×1525mm
28mm
Japan
2024
±0.03mm
Interested in the Mazak OPTIPLEX Bevel 3015?
Get pricing and availability from verified suppliers
Mazak OPTIPLEX Bevel 3015 8kW buyer page for bevel-cutting fiber laser searches. Validate bevel head scope, 3015 bed, 8kW source package, Mazatrol workflow, sample bevel parts, automation, gas plan, and service coverage before comparing with flat-cut OPTIPLEX, TRUMPF bevel, or Amada systems.
Use this OPTIPLEX Bevel page for Mazak bevel-cut searches where the decision is bevel-head scope, programming workflow, sample bevel quality, automation, and service coverage.
Confirm bevel head range, collision protection, 3015 bed format, 8kW source, Mazatrol workflow, pallet scope, chiller, gas plan, and software modules.
Request weld-prep and angled-edge sample parts with angle tolerance, dross, edge quality, heat effect, cycle time, and secondary-operation assumptions documented.
Compare against flat-cut OPTIPLEX, TRUMPF bevel, Amada, and Bystronic systems only after matching bevel requirements, automation, service response, and installed cost.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $460000-640000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
8kW Mazak OPTIPLEX route for bevel-cut package validation
OPTIPLEX Bevel comparisons should include bevel angle range, head package, collision controls, software, source, automation, gas plan, sample bevel parts, service response, and installed cost.
Best For: Shops validating bevel cutting and weld-prep productivity where the bevel head, programming workflow, and service support justify the premium.
Power vs. work area compared to 51 machines in this category
| Brand | Mazak |
| Model | OPTIPLEX Bevel 3015 |
| Laser Type | Fiber |
| Power Output | 8 kW |
| Wavelength | 1070 nm |
| Laser Source | nLIGHT |
| Work Area (L × W) | 3050 × 1525 mm |
| Positioning Accuracy | ±0.03 mm |
| Repeatability | ±0.02 mm |
| Control System | Mazatrol PreviewG |
| Cooling Type | Water |
| Country of Origin | JP |
| Release Year | 2024 |
| Warranty | 2 years |
| Price Range | $460,000 - $640,000 |
Maximum cutting thickness across materials
Maximum material thickness and cutting speeds for the Mazak OPTIPLEX Bevel 3015
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Mild Steel | 28mm | 15m/min | 6.5m/min |
| Stainless Steel | 22mm | 12m/min | - |
| Aluminum | 16mm | 18m/min | - |
| Titanium | mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Shops validating bevel cutting and weld-prep productivity where the bevel head, programming workflow, and service support justify the premium.
Budget for protective window replacement, nozzle wear, chiller service, extraction filters, and periodic source/cutting-head inspection.
These high-power alternatives offer comparable specifications from other manufacturers.
| Model | Power | Work Area | Max Steel | Origin | |
|---|---|---|---|---|---|
Mazak OPTIPLEX Bevel 3015 Current | 8 kW | 3050×1525 | 28mm | Japan | - |
Senfeng SF12025H 60kW | 60 kW | 12000×2500 | 100mm | China | View → |
Cutlite Penta Plus EVO 12030 60kW | 60 kW | 12000×3000 | 80mm | Italy | View → |
HSG G6025H 40kW | 40 kW | 6000×2500 | 80mm | China | View → |
Cutlite Penta FHD 12030 40kW | 40 kW | 12000×3000 | 70mm | Italy | View → |
7 models available — sorted by power output
3050×1525mm
Steel: 28mm max
Common questions about the Mazak OPTIPLEX Bevel 3015
The Mazak OPTIPLEX Bevel 3015 features a 8kW fiber laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the Mazak OPTIPLEX Bevel 3015 8kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Pick fiber, CO2, or solid-state based on material, wavelength, and budget.
02Laser Power RecommenderTranslate material and thickness needs into a viable power range.
03Workspace Size MatcherMatch part dimensions and nesting needs to table size.
04Assist Gas SelectorChoose gas type, pressure, and purity before comparing systems.
05Chiller Capacity CalculatorSize support equipment once the laser class is known.