[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
AccTek
AKJ1530F 1.5kW
1.5kW Fiber
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
1.5kW Fiber cutting Machine
1.5kW
3000×1500mm
10mm
China
2024
±0.05mm
Interested in the AccTek AKJ1530F 1.5kW?
Get pricing and availability from verified suppliers
AccTek AKJ1530F 1.5kW buyer page for entry-power 3015 fiber laser searches. Validate exact AKJ1530F naming, 1.5kW source brand, cutting head, CypCut controller, open or enclosed frame scope, chiller, extraction, sample cuts, freight, duties, spare parts, local service, training, warranty labor, and installed cost before comparing with Senfeng, Gweike, Bodor, HSG, or used premium systems.
Use this AKJ1530F 1.5kW page for budget 3015 searches where thin-sheet fit, source/head/controller scope, sample cuts, import cost, spare parts, service support, and installed cost must be validated.
Confirm AKJ1530F naming, 3000 x 1500mm bed format, 1.5kW source brand, cutting head, CypCut controller, open or enclosed frame scope, chiller, extraction, and spare-parts kit.
Request mild steel, stainless, and aluminum samples in the actual thin-gauge mix with edge photos, burr level, pierce marks, nitrogen or oxygen use, and cycle time documented.
Normalize freight, duty, crating, commissioning, spare lenses and nozzles, remote support, local technician response, warranty labor, and acceptance criteria before comparing with Senfeng, Gweike, Bodor, or HSG.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $35000-70000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
AKJ1530F 1.5kW route for entry-power import validation
AKJ1530F comparisons should keep 1.5kW thickness limits clear, then normalize source brand, cutting head, controller, frame/enclosure scope, chiller, samples, freight, duties, spare parts, training, service response, and installed cost.
Best For: Small shops validating a low-cost 3015 fiber laser where thin-sheet fit, quote scope, sample proof, import cost, and service response determine risk.
Power vs. work area compared to 50 machines in this category
| Brand | AccTek |
| Model | AKJ1530F 1.5kW |
| Laser Type | Fiber |
| Power Output | 1.5 kW |
| Wavelength | 1070 nm |
| Laser Source | Raycus or MAX |
| Work Area (L × W) | 3000 × 1500 mm |
| Positioning Accuracy | ±0.05 mm |
| Repeatability | ±0.03 mm |
| Control System | CypCut |
| Cooling Type | Water |
| Country of Origin | CN |
| Release Year | 2024 |
| Warranty | 2 years |
| Price Range | $35,000 - $70,000 |
Maximum cutting thickness across materials
Maximum material thickness and cutting speeds for the AccTek AKJ1530F 1.5kW
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Mild Steel | 10mm | - | - |
| Stainless Steel | 5mm | - | - |
| Aluminum | 4mm | - | - |
| Titanium | mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Small shops validating a low-cost 3015 fiber laser where thin-sheet fit, quote scope, sample proof, import cost, and service response determine risk.
Budget for protective window replacement, nozzle wear, chiller service, extraction filters, and periodic source/cutting-head inspection.
These entry-level alternatives offer comparable specifications from other manufacturers.
2 models available — sorted by power output
3000×1500mm
Steel: 10mm max
Common questions about the AccTek AKJ1530F 1.5kW
The AccTek AKJ1530F 1.5kW features a 1.5kW fiber laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the AccTek AKJ1530F 1.5kW 1.5kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Pick fiber, CO2, or solid-state based on material, wavelength, and budget.
02Laser Power RecommenderTranslate material and thickness needs into a viable power range.
03Workspace Size MatcherMatch part dimensions and nesting needs to table size.
04Assist Gas SelectorChoose gas type, pressure, and purity before comparing systems.
05Chiller Capacity CalculatorSize support equipment once the laser class is known.