[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
Epilog
Fusion Pro 48 120W URL
120W CO2
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
120W CO2 marking Machine
120W
1219×914mm
United States
2024
±0.05mm
Interested in the Epilog Fusion Pro 48 120W URL?
Get pricing and availability from verified suppliers
Epilog Fusion Pro 48 120W buyer page for exact CO2 engraving and light-cutting searches. Validate Fusion Pro 48 naming, 120W CO2 source, 48-inch bed format, camera workflow, lens and table options, rotary package, exhaust or filtration, air assist, fire controls, software, material samples, service response, operator training, warranty labor, and installed cost before comparing with 80W Fusion Pro 48, Trotec Speedy 600, SP3000, Universal Laser, or large flatbed CO2 systems.
Use this Fusion Pro 48 120W URL page for CO2 engraving and light-cutting searches where camera workflow, 48-inch bed size, exhaust, material fit, fire safety, samples, service, and installed cost drive the purchase.
Confirm 48-inch bed format, CO2 source power, lens, camera workflow, exhaust or filtration, air assist, fire controls, and software package.
Request sample cuts or engraves on the actual acrylic, wood, plastic, foam, signage, or packaging materials with edge quality, char, taper, cycle time, and cleanup documented.
Treat this as a CO2 workstation even if the legacy URL category is fiber cutting; compare against CO2 alternatives with similar bed size, material support, extraction, safety, software, and service.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $36000-82000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
Fusion Pro 48 120W URL route for CO2 workstation validation
Fusion Pro 48 120W comparisons should treat this as a CO2 engraving and light-cutting workstation even under a legacy fiber-cutting URL category; normalize bed size, optics, extraction, samples, software, service, training, warranty labor, and installed cost.
Best For: Shops validating a large CO2 workstation where bed size, camera workflow, extraction, fire safety, material samples, service, and installed cost matter more than metal-cutting wattage.
Power vs. work area compared to 50 machines in this category
| Brand | Epilog |
| Model | Fusion Pro 48 120W URL |
| Laser Type | CO2 |
| Power Output | 0.12 kW |
| Wavelength | 10600 nm |
| Laser Source | Epilog CO2 |
| Work Area (L × W) | 1219 × 914 mm |
| Positioning Accuracy | ±0.05 mm |
| Repeatability | ±0.025 mm |
| Control System | Epilog Dashboard / camera workflow |
| Cooling Type | Air or water |
| Country of Origin | US |
| Release Year | 2024 |
| Warranty | 2 years |
| Price Range | $36,000 - $82,000 |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Shops validating a large CO2 workstation where bed size, camera workflow, extraction, fire safety, material samples, service, and installed cost matter more than metal-cutting wattage.
Material capability is not fully published. Request a test-cut report for your thickest production material.
Check thickness parametersBudget for mirror alignment, tube or resonator service, optics cleaning, chiller maintenance, and regular beam-path inspection.
These entry-level alternatives offer comparable specifications from other manufacturers.
| Model | Power | Work Area | Max Steel | Origin | |
|---|---|---|---|---|---|
Epilog Fusion Pro 48 120W URL Current | 0.12 kW | 1219×914 | - | United States | - |
Trotec SP4000 500W CO2 URL | 0.5 kW | 3210×2210 | - | Austria | View → |
SPI Lasers redENERGY G4 200W | 0.2 kW | - | - | GB | View → |
4JET Technologies Inline Marker 200 URL | 0.2 kW | - | - | Germany | View → |
Universal Laser Systems Ultra X6000 | 0.15 kW | 812×457 | - | United States | View → |
7 models available — sorted by power output
1219×914mm
Common questions about the Epilog Fusion Pro 48 120W URL
The Epilog Fusion Pro 48 120W URL features a 0.12kW co2 laser, suitable for marking and engraving.
Contact suppliers for pricing, lead times, and detailed specifications for the Epilog Fusion Pro 48 120W URL 0.12kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.