MAX Photonics
MFSC-6000W
6kW Fiber
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
6kW Fiber cutting Machine
6 kW
28mm
China
2024
Interested in the MAX Photonics MFSC-6000W?
Get pricing and availability from verified suppliers
Compared against 748 machines in this category
MAX Photonics MFSC series continuous wave fiber laser sources provide reliable power for industrial cutting applications at competitive pricing. Operating at 1080±10nm wavelength with power from 1kW to 6kW, the MFSC series addresses standard fabrication cutting requirements.
Power tunability from 10% to 100% with power stability of ±1% ensures consistent cutting quality. Modulation frequency up to 5kHz enables efficient pulsed cutting for thin materials. Beam parameter product (BPP) from 1.1 to 1.5 mm×mrad with 50μm QBH fiber delivers focused beam quality for precision cutting.
Key features include full-optical fiber construction with fewer spatial optical devices for reduced fault rates, fully sealed structure for dust and moisture protection, water cooling for reliable high-power operation, and electro-optical conversion efficiency exceeding 90%. Processing carbon steel, stainless, aluminum, brass, and copper at thicknesses appropriate to power level, MAX Photonics MFSC sources power entry-level and mid-range cutting systems from Chinese and international integrators for general fabrication applications.
Power vs. work area compared to 50 machines in this category
| Brand | MAX Photonics |
| Model | MFSC-6000W |
| Laser Type | Fiber |
| Power Output | 6 kW |
| Wavelength | 1070 nm |
| Beam Quality (M²) | 3 |
| Laser Source | MAX |
| Cooling Type | Water |
| Power Consumption | 12 kW |
| Country of Origin | CN |
| Release Year | 2024 |
| Warranty | 3 years |
| Price Range | $11,000 - $16,000 |
Maximum cutting thickness across materials
Maximum material thickness and cutting speeds for the MAX Photonics MFSC-6000W
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Mild Steel | 28mm | 20m/min | 6m/min |
| Stainless Steel | 20mm | 12m/min | 4.5m/min |
| Aluminum | 16mm | 15m/min | 5m/min |
| Copper | 10mm | - | - |
| Brass | 10mm | - | - |
| Titanium | 10mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Best fit for general fabrication and job shops that need a balance of purchase price, cutting range, and daily production flexibility.
Plan preventive service roughly every 5,000 operating hours.
These mid-range alternatives offer comparable specifications from other manufacturers.
5 models available — sorted by power output
Steel: 28mm max
Common questions about the MAX Photonics MFSC-6000W
The MAX Photonics MFSC-6000W features a 6kW fiber laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the MAX Photonics MFSC-6000W 6kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Start with material, thickness, quality target, and required cutting speed.
→Cutting Speed ChartValidate the speed assumption against material, thickness, and power data.
→Cutting Time CalculatorConvert speed into beam-on time, pierce time, rapid moves, and capacity.
→Gas Flow CalculatorEstimate gas consumption and cylinder or bulk supply demand.
→Cost EstimatorCombine cycle time, gas, electricity, consumables, material, and labor.