[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
Raytools
BM115 Cutting Head URL
Power not listed Fiber cutting head
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
Power not listed Fiber cutting head cutting Machine
Power not listed
Switzerland
2024
Interested in the Raytools BM115 Cutting Head URL?
Get pricing and availability from verified suppliers
Raytools BM115 buyer page for cutting-head replacement and retrofit searches. Validate BM115 naming, rated power and fiber interface, collimation and focus optics, nozzle and protective window scope, height sensing compatibility, controller integration, spare parts, cooling, installation ownership, alignment, sample cuts, service support, warranty labor, and downtime risk before comparing with BM111, BM114, Precitec, WSX, or complete cutting-machine quotes.
Use this BM115 page for cutting-head replacement and retrofit searches where the buyer must separate component scope from a complete cutting machine, then validate power rating, optics, controller compatibility, alignment, service parts, and downtime risk.
Confirm BM115 naming, rated power, fiber connector, collimation and focus optics, nozzle and protective-window scope, height sensing, cooling, cable set, and spare-part availability.
Validate laser-source compatibility, controller interface, capacitive sensing, Z-axis mount, gas path, alignment responsibility, service access, and whether installation is included before ordering.
Request cut samples after retrofit with edge quality, pierce reliability, focus stability, nozzle behavior, protective-window life, cycle time, and acceptance criteria documented.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $2500-9500 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
BM115 route for cutting-head component validation
BM115 comparisons must stay component-only; normalize power rating, optics, nozzle scope, capacitive sensing, controller compatibility, alignment, service parts, and warranty ownership.
Best For: Maintenance teams and retrofit buyers separating a cutting-head quote from complete machine scope and installation responsibility.
Power vs. work area compared to 50 machines in this category
| Brand | Raytools |
| Model | BM115 Cutting Head URL |
| Laser Type | Fiber cutting head |
| Power Output | 0 kW |
| Wavelength | 1070 nm |
| Laser Source | Source-independent component |
| Control System | Head interface |
| Cooling Type | Water |
| Country of Origin | CH |
| Release Year | 2024 |
| Warranty | 1 years |
| Price Range | $2,500 - $9,500 |
Maximum material thickness and cutting speeds for the Raytools BM115 Cutting Head URL
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Titanium | mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Maintenance teams and retrofit buyers separating a cutting-head quote from complete machine scope and installation responsibility.
Material capability is not fully published. Request a test-cut report for your thickest production material.
Check thickness parametersRequest the preventive maintenance schedule, spare parts kit, and local service response time before purchase approval.
These entry-level alternatives offer comparable specifications from other manufacturers.
| Model | Power | Work Area | Max Steel | Origin | |
|---|---|---|---|---|---|
Raytools BM115 Cutting Head URL Current | 0 kW | - | - | Switzerland | - |
TRUMPF TruLaser 1030 fiber | 3 kW | 3000×1500 | 12mm | Germany | View → |
Kern Lasers FiberCELL | 3 kW | 1320×1020 | 12mm | United States | View → |
DNE Laser D-Fast 1530 3kW | 3 kW | 3000×1500 | 16mm | China | View → |
Han's Laser G3015F 3kW | 3 kW | 3000×1500 | 16mm | China | View → |
3 models available — sorted by power output
Common questions about the Raytools BM115 Cutting Head URL
The Raytools BM115 Cutting Head URL features a 0kW fiber cutting head laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the Raytools BM115 Cutting Head URL 0kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Pick fiber, CO2, or solid-state based on material, wavelength, and budget.
02Laser Power RecommenderTranslate material and thickness needs into a viable power range.
03Workspace Size MatcherMatch part dimensions and nesting needs to table size.
04Assist Gas SelectorChoose gas type, pressure, and purity before comparing systems.
05Chiller Capacity CalculatorSize support equipment once the laser class is known.