[LOADING EQUIPMENT DATABASE...]
[LOADING EQUIPMENT DATABASE...]
DNE Laser
D-Fast 3kW URL
3kW Fiber
Product image not available.
Visit manufacturer for official photos.
Product images and specifications are property of their respective manufacturers. LaserSpecHub aggregates publicly available data for comparison purposes only.
3kW Fiber cutting Machine
3kW
3000×1500mm
16mm
China
2024
±0.05mm
Interested in the DNE Laser D-Fast 3kW URL?
Get pricing and availability from verified suppliers
DNE Laser D-Fast 3kW buyer page for exact URL searches where buyers may compare shorthand D-Fast naming with D-Fast 1530. Validate 3kW source package, 3000 x 1500mm bed format, cutting head, controller, enclosure or exchange-table scope, chiller, extraction, safety package, spare-parts kit, sample cuts, freight, commissioning, local service response, operator training, warranty labor, and installed cost before comparing with D-Fast 1530, DF3015Plus, HSG, Bodor, Gweike, Senfeng, or used premium systems.
Use this D-Fast 3kW shorthand page for DNE value searches where exact 1530 or 3015 naming, light-gauge fit, package scope, samples, spare parts, local service, and installed cost must be validated.
Confirm whether the quote maps to D-Fast 1530 or another D-Fast 3015 package, then lock bed format, 3kW source, cutting head, controller, chiller, enclosure or exchange-table scope, extraction, safety package, and spare-parts kit.
Request mild steel, stainless, and aluminum samples with edge photos, pierce quality, burr level, nitrogen use, gas pressure assumptions, and cycle time for the actual thin-sheet mix.
Compare with D-SOAR Plus and other 6kW+ machines only after matching thickness mix, gas cost, freight, commissioning, spare parts, service response, warranty labor, and installed cost.
Estimated range is a planning band. Confirm the final quote against included software, optics, safety package, installation, freight, training, and service terms.
Use $48000-92000 as the research range, then normalize every supplier quote to the same configuration.
Ask for sample results, service response time, warranty labor terms, consumable pricing, facility requirements, and acceptance criteria before approval.
Compare one same-power alternative, one lower-cost alternative, and one premium support option before treating the first quote as market price.
D-Fast 3kW URL route for DNE value-package validation
D-Fast 3kW comparisons should distinguish shorthand URL intent from D-Fast 1530 pages, then normalize source, head, controller, chiller, enclosure, samples, spare parts, training, service response, warranty labor, and installed cost.
Best For: Fabricators validating a 3kW DNE value package where shorthand naming, samples, installed cost, spare parts, and service response must be proven.
Power vs. work area compared to 51 machines in this category
| Brand | DNE Laser |
| Model | D-Fast 3kW URL |
| Laser Type | Fiber |
| Power Output | 3 kW |
| Wavelength | 1070 nm |
| Laser Source | Raycus or IPG |
| Work Area (L × W) | 3000 × 1500 mm |
| Positioning Accuracy | ±0.05 mm |
| Repeatability | ±0.03 mm |
| Control System | CypCut |
| Cooling Type | Water |
| Country of Origin | CN |
| Release Year | 2024 |
| Warranty | 2 years |
| Price Range | $48,000 - $92,000 |
Maximum cutting thickness across materials
Maximum material thickness and cutting speeds for the DNE Laser D-Fast 3kW URL
| Material | Max Thickness | Speed @5mm | Speed @10mm |
|---|---|---|---|
| Mild Steel | 16mm | - | - |
| Stainless Steel | 10mm | - | - |
| Aluminum | 8mm | - | - |
| Titanium | mm | - | - |
Find more machines matching these specifications
Use this block to qualify price, fit, operating requirements, and shortlist alternatives before requesting quotes.
Confirm freight, installation, training, chiller, fume extraction, assist gas setup, and spare lens/nozzle starter kits before comparing final supplier quotes.
Fabricators validating a 3kW DNE value package where shorthand naming, samples, installed cost, spare parts, and service response must be proven.
Budget for protective window replacement, nozzle wear, chiller service, extraction filters, and periodic source/cutting-head inspection.
These entry-level alternatives offer comparable specifications from other manufacturers.
7 models available — sorted by power output
3000×1500mm
Steel: 16mm max
Common questions about the DNE Laser D-Fast 3kW URL
The DNE Laser D-Fast 3kW URL features a 3kW fiber laser, suitable for metal cutting and sheet processing.
Contact suppliers for pricing, lead times, and detailed specifications for the DNE Laser D-Fast 3kW URL 3kW.
LaserSpecHub connects you with verified equipment suppliers worldwide
Keep model-specific price queries on the model page, then use the workflow links to validate power, speed, time, gas use, and cost.
Model price authorityModel-specific price range, specifications, alternatives, and inquiry path.
Pick fiber, CO2, or solid-state based on material, wavelength, and budget.
02Laser Power RecommenderTranslate material and thickness needs into a viable power range.
03Workspace Size MatcherMatch part dimensions and nesting needs to table size.
04Assist Gas SelectorChoose gas type, pressure, and purity before comparing systems.
05Chiller Capacity CalculatorSize support equipment once the laser class is known.